Temperature controller for boiler (water heater)
Description: Regulates the water temperature in the water tank by switching the circuit on and off regularly.
ELEKTROAPARATURA EOOD owns an industrial design for product № 3514.
Nominal voltage: 220 V
Rated current with resistive load: 16A
Temperature range: 10-72 °C
Setting accuracy: 5 °C
Insensitivity zone: 10 °C
Guaranteed durability for the number of switching cycles: min 100,000 pieces
Temperature controller for heating
Description: Maintains the temperature within certain limits through the automatic switching of circuits.
Use: In electric heaters with quartz heating elements, oil convection electric heaters, fan blades and electric heaters, underfloor heating for the regulatory authorities and other devices.
Nominal voltage: 220 V
Rated operational current: 12A
Nominal frequency: 50Hz
Temperature range: 15-75 °C
Insensitivity zone: up to 5 °C
Guaranteed durability for the number of switching cycles: min 100,000 pieces
Temperature controller osculant
Description: Maintains the temperature of the device within certain limits by automatically switching the circuit on and off.
Use: In irons, toasters, deep fryers and much more.
Nominal voltage: 220 V
Rated operational current: 6A / 10A
Nominal frequency: 50Hz
Temperature range: 25-250 °C
Insensitivity zone: up to 28 °C
Guaranteed durability for the number of switching cycles: min 30,000 pieces
Double-pole thermal switch with manual reset
Description: OTDD switches the electricity (both phase and zero) of the heating system when it reaches a certain temperature value. Its advantages over unipolar are both thermal shutdown of zero and phase as well as the use of a tube flange. Suitable for installation in electric water heaters and other heating devices.
ELEKTROAPARATURA EOOD holds the patent for utility model article OTDD, № 395 Y1.
Nominal voltage: 220 V / 380 V
Rated operational current: 16A
Nominal frequency: 50Hz / 60Hz
Switch-off temperature: 145 °C
Accuracy of temperature when switching off: ± 6 °C
Mono-pole thermal switch with manual reset
Description: OTDE switches off the heater phase when it reaches a certain temperature value.
Use: Used in boilers, heat storage and others for which no bipolar switch-off is necessary.
Nominal voltage: 220 V
Rated current with resistive load: 16A
Nominal frequency: 50Hz / 60Hz
Switch-off temperature: 145 °C
Accuracy of temperature when switching off: ± 6 °C
Key to operational chain
Switches two independent operational circuits on and off and switches electrical signal paths. The key is designed for continuous operation. Corresponds to BDS 11517-73.
Description: two blades are attached to a base. With the help of the secret key, the contact drum is turned from position 0 to position 4 and vice versa. In this way, the terminals are changed and different combinations of connections are created between them.
| Terminal № | 30 | 15 | 56 | 57 | 58 | 80 | 85 |
| Voltage [V] | 12 | 12 | 12 | 12 | 12 | 80 | 80 |
| Amperage [A] | 18 | 6 | 6 | 6 | 6 | 1,5 | 1,5 |
At the request of the customer, the product for tropical humid climate TH-II can be produced and delivered in a package that is only valid within the country.
Central ignition key
Description: The central ignition key switches ignition and lighting circuits in automobiles, tractors and other vehicles on and off. The key is protected from dust, dirt and the penetration of foreign bodies by a cover on which the positions of the receptacles 0, 1, 2, 3 and 4 are marked.
Operating temperature from -40 to +60 °C. Developed for continuous operation.
Limit switch /KI - G1; KI - G11; KI - G12/
Description: The limit switches are designed for inclusion in the command chain of the rope electric hoists and serve as an emergency shutdown of the hoist in reaching certain upper and lower positions. Switches have been designed to work in tropical, marine and the special conditions.
Nominal voltage: 42 V
Rated insulation voltage: 60V
Rated current: 2,5 A
Persistent current: 6 ANominal frequency: 50Hz / 60Hz
Guaranteed durability for the number of switching cycles: min 100,000 pieces
Limit switch KI-62
Description: The KI-62 limit switch is designed to be included in the electrical chain of a dual motor for switching the hoist on and off when the load reaches certain extreme positions. In addition, the limit switch KI-62 can be used for other purposes with its data.
Nominal voltage: 380 V and 500 V
Permanent power: 6 A
Nominal power of the motor command: 0,9 kW
Factor of motor, power factor: 0,4Mechanical and electrical life: 100,000 cycles
Number of contacts: 2
KI-PDT 2, 22, 23, 24, 25, and 26
Limit switch with positive action. Two-Steps-/ IQ-PDT 2, 22, 23, 24, 25 und 26 /
Description: The limit switches with positive measures are used in hoists to exclude the motor in certain extreme situations. If the hoist continues to move after the first stage has been excluded, the second stage is activated, which triggers the operative chain of the main contactor.
Row tension: 380 V
Nominal voltage: 380 V / 42 V
Rated current: 2,5 A at 380 V
Nominal frequency: 50Hz / 60Hz
Terminal strip
Description: The terminal strip is intended for the connection of cables to the stator of the electrical hoists. Used to mount switches of the KI-G type (KI-G1, KI-G11 or KI-G12), which ensure the emergency stop of the hoist.
Locking key with and without a roller
Use: Used in the manufacture of trucks and forklifts.
Nominal voltage: 80 V
Nominal current: 2,5A
Rated insulation voltage: 110 V
The frequency of meetings: 600 incl. / Hour
Guaranteed durability for the number of switching cycles: min 100,000 pcs
Flanges for boilers with a pipe or with two pipes
Description: The flanges consist of a metal disc, 5 mm thick, which contains holes for attachment, and one or two tubes. Flanges are coated - galvanized.
Centrifugal switch
Description: Centrifugal pump switch is designed for installation in single-phase asynchronous motors. Corresponds to the quality required by ON 0971318-80.
Nominal voltage: 220 V
Nominal frequency: 50Hz
Switching current: 15A
Power factor load: 0.8
Climate zone: N
Centrifugal switch - 20A
Description: Centrifugal pump switch is designed for installation in single-phase asynchronous motors.
Nominal voltage: 220 V
Nominal frequency: 50Hz
Switching current: 20A
Power factor load: 0.8
Climate zone: N
Electrical life: 150,000 cycles
Direct command switches for hoists / DKPT /
Description: Switches the electricity of hoists with a capacity of up to 500 kg on or off. Depending on the type of hoist, produce up to 4 types of command switches.
Nominal voltage: 380 V
Nominal frequency: 50Hz
Rated current: 2,5A
Lasting performance: 6A
Degree of protection: IP-54
Element for DKPT
Description: The element can be used for all types of DKPT.
Use: For switching bipolar circuits on or off.
Nominal voltage: 380 V
Nominal frequency: 50Hz
Rated current: 2,5A
Persistent electricity: 6A
Degree of protection: IP-00
Manual command controller / 3143-1 /
Description: The command controller is designed for commutative switches from operational chains and manually controlled electric cars.
Thermometer without its own scale
Description: The thermometer is used for installation in the furnace, heat and combustion chambers for an informative display of the current temperature.
Sound signal patron
Description: This cartridge is fired from the device type "pen" with threaded connection M9x1mm with lateral and central fight. The signal cartridge height is not less than 45 m and the volume of the sound 95dB. It is used to control the animals.
Light signal patron
Description: This signal cartridge is a light signal like a light rocket, which is fired by the fire line device type "pen" with a screw connection with lateral M 9x1mm from empty pistols and revolvers at a height of not less than 45 meters. Is used for traffic lights in emergencies.
Colors: red with bright 15000 cd, white with bright 10000 cd, green color brightness 3000 cd
Hand grenade RGN-86
Description: Hand grenade RGN-86 was developed to destroy enemy troops. Complete with a timer with a delay time of 3.2 to 4 seconds.
| Effective radius of the effect | 5 m |
| Safety radius | 30 - 35 m |
| Type of detonation mechanism | DWM |
| Delay time after removal of the ignition | 3,2 - 4 s |
| Temperature difference | - 50 bis + 50 °C |
| Weight | 0,265 ± 0,015 kg |
| Storage (storage rooms) | 10 years |
| Storage (field room) | 2 years |
| Length | 92 - 93,7 mm |
| Diameter | 60,4 - 61 mm |
| Net explosive weight | 0,0575 ± 0,005 kg |
| UN No | 0284 |
| IMO Kode | 1.1D |
Packaging: 20 pieces of grenades and 20 pieces of Zander (in 2 metal boxes) are packed in a wooden case.
| Case dimensions | 495 x 312 x 158 mm |
| Case volume | 0,024 m3 |
| Gross weight of the case | 12 kg |
Hand grenade RGO-78
Description: Hand grenades RGO-78 was developed to destroy enemy troops. Complete with a timer with a delay time of 3.2 to 4 seconds.
| Effective radius of the effect | 25 m |
| Safety radius | - |
| Type of detonation mechanism | DWM |
| Delay time after removal of the ignition | 3,2 - 4 s |
| Temperature difference | - 50 bis + 50 °C |
| Amount of the security trap | 3 m |
| Weight | 0,445 kg |
| Storage (storage rooms) | 10 years |
| Storage (field room) | 2 years |
| Length | 93 - 94,7 mm |
| Diameter | 60,2 - 61 mm |
| Net explosive weight | 0,088 kg |
| UN No | 0284 |
| IMO Kode | 1.1D |
Packaging: 20 pieces of grenades and 20 pieces of Detonator (in 2 metal boxes) are packed in a wooden case.
| Case dimensions | 495 x 312 x 158 mm |
| Case volume | 0,024 m3 |
| Gross weight of the case | 17 kg |
Hand grenade RGD-5
Description: Hand grenades RGD-5 was developed to destroy enemy troops. Complete with a timer with a delay time of 3.2 to 4 seconds.
| Effective radius of the effect | 5 m |
| Safety radius | 25 m |
| Type of detonation mechanism | UZRGM |
| Delay time after removal of the ignition | 3,2 - 4 s |
| Temperature difference | - 50 bis + 50 °C |
| Amount of the security trap | 3 m |
| Weight | 0,320 kg |
| Storage (storage rooms) | 10 years |
| Storage (field room) | 2 years |
| Length | 114 mm |
| Diameter | 56,8 mm |
| Net explosive weight | 0,113 kg |
| UN No | 0285 |
| IMO Kode | 1.2D |
Packaging: 20 pieces of grenades and 20 pieces of Detonator (in 2 metal boxes) are packed in a wooden case.
| Case dimensions | 495 x 312 x 158 mm |
| Case volume | 0,024 m3 |
| Gross weight of the case | 15 kg |
Imitation defense grenade RGO-IM
| Type of detonation mechanism | DWM-IM |
| Delay time after removal of the ignition | 3,2 - 4 s |
| Weight | 0,32 ± 0,04 kg |
| Effect | strong thunder and blinding light |
| Length | 99 mm |
| Diameter | 60,4 mm - 61 mm |
| Sound strength | 100 - 120 dB |
| Net explosive weight | 0,005 kg |
| UN No | 0372 |
| IMO Kode | 1.2G |
Imitation defense grenade RGD-5-IM
| Type of detonation mechanism | UZRGM-IM |
| Delay time after removal of the ignition | 3,2 - 4 s |
| Weight | 0,32 ± 0,04 kg |
| Effect | strong thunder and blinding light |
| Length | 128 mm |
| Diameter | 57 mm |
| Sound strength | 100 - 120 dB |
| Net explosive weight | 0,005 kg |
| UN No | 0372 |
| IMO Kode | 1.2G |
Pyro-delay 3V-7G for PG-7V and PG-7VM
| Delay time | 0,08 - 0,115 s |
| Weight | 0,032 kg |
| Weight von VV | 0,00504 kg |
| Storage (storage rooms) | 10 years |
| Storage (field rooms) | 1 year |
| UN No | 0316 |
| IMO Kode | 1.3G |
Detonator MD-5M
| Weight | 0,0097 kg |
| IMO Kode | 1.4G |
| Connection | 10,78 x 24 |
Detonator DWM
Description: Suitable for the following hand grenade types RGO-78, RGN-86.
| Combined with the following grenade types | RGO-78, RGN-86 |
| Weight | 0,030 ± 0,005 kg |
| Net explosive weight | 0,003 kg |
| Explosion delay time | 3,2 - 4 s |
| Amount of security fall | 3 m |
| Temperature difference | - 50 bis + 50 °C |
| Storage (storage rooms) | 10 years |
| Storage (field room) | 2 years |
| Number of grenades in the metal package box | 10 |
| Number of metal package boxes in wooden pallet | 200 |
| UN No | 0367 |
| IMO Kode | 1.4S |
Detonator UZRGM
Description: Suitable for the following hand grenade types RGD-5, F-1, RG-42.
| Combined with the following grenade types | RGD-5, F-1, RG-42 |
| Weight | 0,050 ± 0,005 kg |
| Net explosive weight | 0,003 kg |
| Explosion delay time | 3,2 - 4 s |
| Amount of security fall | 3 m |
| Temperature difference | - 50 bis + 50 °C |
| Storage (storage rooms) | 10 years |
| Storage (field room) | 2 years |
| Number of grenades in the metal package box | 10 |
| Number of metal package boxes in wooden pallet | 200 |
| UN No | 0367 |
| IMO Kode | 1.4S |
Detonator DWM-IM
Description: Suitable for the following hand grenade types RGO-78, RGN-86.
| Combined with the following grenade types | RGN-IM, RGO-IM |
| Weight | 0,032 ± 0,005 kg |
| Net explosive weight | 0,005 kg |
| Explosion delay time | 3,2 - 4 s |
| Amount of security fall | 3 m |
| Temperature difference | - 50 bis + 50 °C |
| Storage (storage rooms) | 4 years |
| Storage (field room) | 1 years |
| Number of grenades in the metal package box | 10 |
| Number of metal package boxes in wooden pallet | 200 |
| UN No | 0368 |
| IMO Kode | 1.4S |
Detonator UZRGM-IM
Description: Suitable for the following hand grenade types RGD-5, F-1, RG-42.
| Combined with the following grenade types | RGD-5-IM |
| Weight | 0,048 ± 0,005 kg |
| Net explosive weight | 0,005 kg |
| Explosion delay time | 3,2 - 4 s |
| Amount of security fall | 3 m |
| Temperature difference | - 50 bis + 50 °C |
| Storage (storage rooms) | 4 years |
| Storage (field room) | 1 years |
| Number of grenades in the metal package box | 10 |
| Number of metal package boxes in wooden pallet | 200 |
| UN No | 0368 |
| IMO Kode | 1.4S |
Fuse MRV-U
Description: Suitable for 122 mm HE Rocket M 210F (for BM-21 “GRAD”). MRV-U is a mechanical, nose, point-detonating fuze with selectable super-quick or delayed action. The fuze features distant arming. The fuze MRV-U completes 122 mm High Explosive artillery rocket M-210F, launched from BM-21 “GRAD” Multiple Launch Rocket System. The fuze is safe in storage, handling and operation and ensures the safe and reliable function of the ammunition in all weather conditions.
| Length of Fuze (max): | 190…194 mm |
| Intrusion Length (max): | 54 mm |
| External Diameter (max): | 64 mm |
| Weight of Fuze: | 740 g |
| Type of Booster Pellet: | A-IX-1 |
| Weight of Booster Pellet: | 23.2 g |
| Thread Size: | Spec. 44.96 x 2 tpi |
| Action: | PD; SQ or delayed |
| Arming: | distant, by set-back forces |
| Range of Arming: | after burning of the rocket propellant |
| Time of Delay, short delay: | 0.001 to 0.005 s |
| Time of Delay, long delay: | 0.007 to 0.013 s |
| Temperature Range for Firing: | -40 to +50°C |
| Temperature Range for Storage: | -40 to +50°C |
| Shelf Life: | 15 years |
| Packing: | 16 fuzes in 4 air-tight sealed metal boxes packed in a wooden case |
| case with dimensions: | 510 x 480 x 160 mm |
| Gross weight: | 24 kg |
| Volume: | 0.033 m3 |
| NSN: | EA 155.00.00 1390-50-001-5727 |
Fuse - FH-2D
Description: The FH–2D fuse is mechanical, nose, impact with instantaneous and inertial action, non-boresafe type. The FH–2D fuse is intended for use on HE-FRAG grenades ОFG-7, ОG-9 and ОG-15 for firing respectively from the RPG-7V, SPG-9M and serves to ensure the safety during handling and firing and to detonate the warhead upon impact with a target.
| Overall dimensions: | Ø40х141 mm |
| Mass of fuse: | 0.222 kg |
| Type of explosive filling: | PENT-D |
| Mass of explosive filling: | 0.01 kg |
| Arming distance: | 55±5 milliseconds |
| Safe drop height: | 3 m |
| Fixing thread: | Sp 36.18х10 turns in 1՛՛ |
| Safe operational temperature range: | -40 to 50°С |
| IMO code: | 1.1В |
| UN No: | 0106 |
| NSN: | 1390-50-001-5726 |
Fuse - FH-2
Description: The FH–2 fuse is mechanical, nose, impact with instantaneous and inertial action, non-boresafe type. The FH-2 fuse is intended for use on HE-FRAG grenades ОFG-7, ОG-9 and ОG-15 for firing respectively from the RPG-7V, SPG-9M and serves to ensure the safety during handling and firing and to detonate the warhead upon impact with a target.
| Gesamtabmessungen: | Ø40х132.5 mm |
| Mass of fuse: | 0.204 kg |
| Type of explosive filling: | TNT |
| Mass of explosive filling: | 0.01 kg |
| Arming distance: | 2.5 – 20 m |
| Safe drop height: | 3 m |
| Fixing thread: | Sp 36.18х10 turns in 1՛՛ |
| Safe operational temperature range: | -40 to 50°С |
| IMO code: | 1.1В |
| UN No: | 0106 |
| NSN: | 1390-50-001-5726 |
